Fermax VEO XS Guía Inicio Rápida página 12

F2
WiFi signal strength icons displayed in the menu:
Between 0% and 20%
or monitor not paired.
Auto-on
Note: This section goes through the most basic steps in quick commissioning. For more information,
please download the DUOX Blue mobile application manual, code: 970156 at www.fermax.com.
6
DUOX WIFI VEO XS MONITOR
11
If the WiFi network and credentials provided are correct, the monitor will
connect to the Internet and the process will have been completed successfully.
12
The application will show the new linked house as available and connected
(green tick ) and the monitor will show that connection was successful.
The white WiFi led will stay now stay on.
13
Once connected, the WiFi signal strength will appear in the bottom right
of the monitor user menu.
Between
20% – 40%
Monitor pairing process
confirmation message.
Between Between
40% – 60% 60% – 80%
14
To test the call divert function, the user
can select auto-on and see whether it
connects to the outdoor panel, (as long
as it is not in use).
ERROR
An error message will ap-
pear in the monitor pairing
processif there is a problem.
Between
80% – 100%