N-Com MCS II Seguridad E Instrucciones página 11

Position the left and right speakers in the respective housing obtained in the

polystyrene cheek padding.
Reassemble the gasket and secure it with the specific screw

Reassemble the cheek padding.

The motorcycle connection cable must be positioned into the micro-usb connector in
the rear part of the helmet.
Fig. 5
Position the

housing on the left of the helmet,
inserting the metal boom in the
groove found in the chin guard
coupling frame (Fig. 5).
Caution: make sure that the side of the
microphone support with the writing "N-
Com" is facing inward.
microphone in the
11