Caution: Adjusting the volume to very high levels may cause damage to your hearing
Caution: Adjust the volume of the N-Com system (where provided) and of the audio
sources connected to it so as to avoid audio reproduction at high volumes. Constant
exposure to high volumes may damage your hearing.
Caution: Improperly installing the system in the helmet may alter the aerodynamic
and safety properties of the helmet itself, thus creating dangerous conditions. Install
the
N-Com
system
documentation. In case of doubt, contact our local N-Com dealer.
All telephones and devices with wireless signal transmission are subject to
interferences that may affect the performance of the device connected to them. These
interferences are not ascribable to a defect of the N-Com system.
Use the device in the normal position only, as described in the product
documentation. Do not attempt to disassemble, tamper with or modify any part of the
N-Com system.
Only qualified personnel can carry out technical assistance on this product. In case
of any malfunction, always turn to your local dealer. The helmet is a safety device.
Tampering with it and/or with the electronic system inside the helmet can lead to
dangerous situations, in addition to invalidating the product warranty.
1.3.
Disposal
Refer to this user manual when disassembling the system from the helmet. Once the
system has been disassembled, dispose of it according to the instructions provided
here below.
The presence of a crossed-out wheelie bin indicates that in the European
Union the product must be disposed of separately at the end of its useful life
(European Directive 2002/96/EC).
Do not dispose of these products together with undifferentiated urban waste.
Proper disposal of obsolete equipment contributes to preventing possible
negative consequences on people's health and on the environment.
For more detailed information on the disposal of obsolete equipment, please
contact your municipality, a waste disposal service or the store where the product was
purchased.
6
according
to
the
instructions
provided
in
the product