Setting the filter capacity
770 l
Press DISPLAY/RESET to in-
crease the number.
44
The filter capacity must
be reset after changing
the filter cartridge.
Find out the filter capacity
from the Filter capacity section
in the filter documents. Enter the
figure manually.
Press PROG to confirm
the number and change to
the next digit.
>3
Press DISPLAY/RESET for
longer than 3 seconds until
the first digit is flashing
in the display.
For filters with ion
exchange technology,
it is necessary to
be aware of the local water
hardness in order to be
able to ascertain the right
filter capacity. Note that
centralised water softening
changes the value for your
household, which then
no longer corresponds to
the value given by your
water company.
Confirm
After entering the final
number, press PROG.
The setting is confirmed
and complete.