Technical Specifications; Operation - Omcan MS-CN-0220 Manual De Instrucciones

Safety and Warranty
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

Model
Voltage
Power
Slicing Thickness
Blade Diameter
Weight
Dimensions
432 x 495 x 381mm
Item Number

Operation

1. Machine should be installed on a flat and stable surface which can withstand its weight.
2. Make sure that line voltage of main power source matches the rated voltage of the machine.
3. Turn on the machine and allow to run for 2-3 minutes to evaluate performance.
4. Once machine is running, the pilot lamp of the power button should be lit and the blade should be rotating
counter clockwise.
5. Slice thickness can be adjusted by turning the slice thickness regulator counter clockwise. Then turn the
fixing positioner knob clockwise. Fixing positioner head should make contact with the plate.
6. Pushing the product carriage forward and back over the blade with a continuous motion, using the product
pusher handle and the pusher knob.
7. Once the amount of product has been sliced, turn the fixing positioner knob back and return the positioner
head back to the original position.
8. Then remove the slices.
Maintenance
To prevent the blade from rusting.
• Use a dry cloth when drying the blade after use.
• Apply cooking oil on the edge of the blade with a dry cloth.
• Sharpen the blade daily.
MS-CN-0220
120W
9" / 220mm
32 lbs. / 14.5 kg. 39.6 lbs. / 18 kg.
17" x 19.5" x 15" 18" x 21" x 15.75"
457 x 533 x 400mm
21629
MS-CN-0250 MS-CN-0300
110V / 60HZ
150W
0.2-15mm | 1/126"-13/22"
10" / 250mm 12" / 300mm
55 lbs. / 24.9 kg.
20.5" x 23.5" x 19.5"
521 x 597 x 495mm
19067
6
MS-CN-0350
250W 400W
14" / 350mm
132 lbs. / 59.9 kg.
31" x 24" x 19.5"
787 x 610 x 495mm
19068 23544