Technical Specifications; Operation - Omcan MS-CN-0300-C Serie Manual De Instrucciones

Safety and Warranty
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

Model
Blade Size
Cut Thickness
Cutting Size
Power
Slicing Volume (approx)
RPM
Electrical
Weight
Packaging Weight
Dimensions
Packaging Dimensions
Item Number

Operation

1. Machine should be installed on a flat and stable surface which can withstand its weight.
2. Make sure that line voltage of main power source matches the rated voltage of the machine.
3. Turn on the machine and allow to run for 2-3 minutes to evaluate performance.
4. Once machine is running, the pilot lamp of the power button should be lit and the blade should be rotating
counter clockwise.
5. Slice thickness can be adjusted by turning the slice thickness regulator counter clockwise. Then turn the
fixing positioner knob clockwise. Fixing positioner head should make contact with the plate.
6. Pushing the product carriage forward and back over the blade with a continuous motion, using the product
pusher handle and the pusher knob.
7. Once the amount of product has been sliced, turn the fixing positioner knob back and return the positioner
head back to the original position.
8. Then remove the slices.
MS-CN-0220-C
9" / 220mm
6.3" x 6.3" / 160 x 160mm
0.16 HP / 0.12 kW
<30 minutes
300
32 lbs. / 14.6 kgs.
33 lbs. / 15 kgs.
19.5" x 17" x 15"
495 x 432 x 381mm
21" x 17" x 16"
533 x 432 x 406mm
41710
MS-CN-0250-C
10" / 250mm
0.2 - 15mm
7" x 7" / 180 x 180mm
0.2 HP / 0.15 kW
20 minutes
250
110V / 60Hz / 1
36.8 lbs. / 16.7 kgs.
41.7 lbs. / 18.9 kgs.
22" x 14.5" x 14.5"
559 x 368 x 368mm
18.5" x 22.5" x 16.3"
470 x 572 x 413mm
41711
6
MS-CN-0300-C
12" / 300mm
8.7" x 8.7" / 220 x 220mm
0.33 HP / 0.25 kW
45 minutes
265
53.1 lbs. / 24.1 kgs.
59.5 lbs. / 27 kgs.
22.4" x 17.5" x 18"
568 x 445 x 457mm
21" x 24" x 20"
533 x 610 x 508mm
41712