Maintenance And Inspection; Safety Measures; Maintenance And Inspection Table - CEMO DT-Mobil Easy Manual De Instrucciones

GB
6.3 Content indicator
(Order No. 8881)
E F
Fig. 6.3.1: Level indicator for
430 l / 460 l tank
E = empty, F = full
24
(Order No. 10089)
E F
Fig. 6.3.2: Level indicator
for 600 l tank

7. Maintenance and inspection

7.1 Safety measures

i
Important!
The operator must provide any protective
clothing that may be required.
Who can carry out maintenance
and inspection work?
Normal maintenance work may be
carried out by operational personnel.
i
Important!
Inspections of the filling stations with
ADR approval may only be performed
by specially trained personnel.
Ask the manufacturer about these training courses.

7.2 Maintenance and inspection table

Interval Assembly
As Outside of
required filling station
Monthly Container
Monthly Piping
system
Annually Tank
(suction
filter)
Every Filling sta-
2.5 years tion
1. Unscrew the lid from
the filling opening
2. Reach into the
opening and pull out
the suction hose
3. Clean the filter
4. Perform steps 1-3
in the reverse
sequence.
Action
Clean off any stuck-on
dirt or diesel
Visual check for damage
Check hoses for cracks
and porosity,
check fittings for leaks
(replace defective parts)
Clean (see picture) with
a low level of diesel fuel
in the tank
Inspection by
experts with:
- Documentation in the
test protocol (see 10)
- Entry on type plate
with waterproof marker
3
2
1
Fig. 7.2: Suction filter