Taking Out Of Service; Taking Out Of Service After Expiry Of The Adr Approval; Warranty; Inspection Protocol - CEMO DT-Mobil Easy Manual De Instrucciones

8. Taking out of service

8.1 Taking out of service after expiry
of the ADR approval
After expiry of the ADR approval of 5 years after
the date of manufacture. Thereafter, filling stations
may be used again in accordance with regulation
ADR 1.1.3.1 c) (see point 1.2.2 of these operating
instructions).
i
Important!
As the approval number is no longer valid,
it must be made unrecognisable on the
type plate of the tank.
To this end, you can use the text adhesive label a
enclosed with the tank documentation on the
DT-Mobil Easy. Cut out a text block in the language
of your choice (German/English/French) and stick it
over the approval number on the type plate b .
1
2
8.2 Decommissioning the filling station
• First, drain the tank completely (by means of the
pump via the delivery hose and delivery nozzle).
Next:
• Disassemble the DT-Mobil Easy into its
constituent parts, sort by material and dispose
of in accordance with local regulations.

9. Warranty

Under our general terms and conditions of trade
we warrant that the equipment will be produced
D
free from defects in materials, functionality or
workmanship.
These can be inspected at
GB
http://www.cemo.de/agb.html
The warranty applies only under the condition that
F
the above operating and maintenance instructions
and all applicable regulations are closely followed.
Modification of the filling station by the customer
without consultation with the manufacturer CEMO
GmbH invalidates any claims under the statutory
warranty.
CEMO GmbH also accepts no responsibility for
damage caused by improper use.

10. Inspection protocol

see back side
Danger
of environmental contamination
through residues in the tank.
Collect these residues separately and
dispose of them in compliance with
local environmental regulations.
GB
25