Stiga T8125 Manual Del Usario página 4

8. Screw left hand hinge brackets #6 to table top follow-
ing these steps:
A. Push U-leg #2 and hinge assembly flat against
top. See Figure 5.
B. Place a spacer that is about 1/16" thick between
hinge legs. Suggestion: either a nickel or a quarter
is an ideal spacer. See Figure 6.
C. With hinge bracket, hinge and leg flat against table
top and spacer between hinge legs, screw bracket
to table with five #20 screws. See Figure 6.
D. Open leg and lock leg hinge. See Figure 7. Re-
move spacer that you used between hinge legs.
9. Repeat step 8 to attach right hand hinge bracket to
table.
Pull To
Lock Hinge
.
10 Attach name panel #5 to inside of U-supports #7.
Secure with hex bolts #9 and locknuts #15. Tighten
nuts but be careful not to crush tubes. See Figure 8.
Figure 7
9
9
2
2
Hinge
Bracket and Leg
flat against table
20
5
7
First
Table Half
4
Figure 5
6
U-Leg
2
Hinge
Spacer between
hinge legs
U-Leg
5
15
9
Figure 6
Figure 8
9