Level One WRE-6001 Guía De Instalación Rápida página 10

the WRE-6001 is connected and suitable for Internet
Connections.
5. Check if the Wifi Signal Strength is OFF, the WRE-6001 isn't
connected and not suitable for Internet Connections. Please
repeat STEP-2 of WPS Pairing or follow next STEP-4 to have
it connected and suitable for Internet connections.
If the WRE-6001 WiFi signal strength LED isn't ON, please
repeat STEP-2 WPS Pairing or goes STEP-4 configure the
WRE-6001 through Advanced Configuration below.
STEP 3
11n Repeater Advanced Configuration(Figure 3)
1. Please make sure your PC can get IP address automatically,
so the router can communicate with your PC during
configuration.
 Select "Control Panel" > "Network Connections".
 Right click the "Local Area Connection" and choose
"Properties".

Select the TCP/IP protocol for your network card.

Click on the Properties button. You should then see the
following screen and make sure you have selected
"Obtain IP address automatically".
10