English - Level One WRE-6001 Guía De Instalación Rápida

English

STEP 1
Connection of WRE-6001 (Figure 1)
1. Connect the Ethernet cable to LAN Port Connect the
supplied RJ45 Ethernet cable from your PC's Ethernet port
to the WRE-6001 LAN Port.
2. Connect the WRE-6001 to your wall-mounted power outlet.
STEP 2
WPS Pairing between WRE-6001 and Wireless xDSL/Cable
Modem (Figure 2)
1. Press WPS button on Wireless xDSL/Cable Modem.
2. Press WPS button on WRE-6001 for 3 seconds and release
WPS button. Now the WPS LED is blinking and the
WRE-6001 is donig WPS Pairing with Wireless xDSL/Cable
Modem.
Make sure to press the button within 120 seconds (2
minutes) after pressing the Wireless xDSL/Cable
Modem's WPS button.
3. Once the WRE-6001 finished doing WPS Pairing with
Wireless xDSL/Cable Modem, the Wifi Signal Strength LED is
ON. The status of Wifi signal strength LED varies depending
on the Wifi signal strength between WRE-6001 and Wireless
xDSL/Cable Modem.
4. Check if the Wifi Signal Strength LED of 11n Repeater is ON,
9