Specifications; Features; Assembly Instructions - Remington REM-45-KFA-O Manual Del Usuario E Instrucciones De Operación

Model #
Rating: Btu/Hr
Fuel Consumption: Gal/Hr
Fuel Tank Capacity: Gallons
Pump Pressure: psi
Volts: AC/Hz
Amps
Phase
Upper Shell
Hot Air Outlet
Lower Shell
Lamp
Thermostat Knob
(80T KFA Only)
Fuel Tank
Power/Reset Switch
ASSEMBLY INSTRUCTIONS (140T-KFA / 175T-KFA / 190T-KFA / 215T-KFA)
1. Tilt the heater tank backward and attach the bot-
tom skid by inserting the skid into the button
spring clips at the front of the bottom support
frame.
Axle Support
Tire
Axle Nut
2. Attach the axle supports by inserting them into
the button spring clips at the rear of the bottom
support frame.
3. Insert the axle through the holes in the axle sup-
ports.
4. Slide the spacers onto the axle.
5. Slide the wheels onto the axle and secure with the
axle nuts.
6. Attach the front handle by inserting the handle
© 2018 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING
OR WHILE CONNECTED TO A POWER SOURCE
45-KFA
45,000
0.35
5
3.0
120VAC / 60Hz 120VAC / 60Hz 120VAC / 60Hz 120VAC / 60Hz 120VAC / 60Hz
1.4
Single
Specifications subject to change without notice.
Extension Cord Wrap
Handle
Fan Guard
Pressure Gauge
Fuel Gauge
Fuel Cap
Power Cord
Axle
Spacer
Figure 1

SPECIFICATIONS

80T-KFA 140T-KFA
80,000 140,000
0.63/2.38 1.1/4.16
5
3.8
1.5
Single Single

FEATURES

Front
Handle
Hot Air
Outlet
Lower Shell
Fuel Gauge
Fuel Cap
into the button spring clips at the front of the top
support frame.
7. Attach the rear handle by inserting the handle
into the button spring clips at the rear of the top
support frame.
8. Check all parts to ensure they are secure before
operating the heater.
5
Kerosene Forced Air Heater User's Manual
190T-KFA
190,000
1.42
10 13
6.6 8.5
2.4 2.7
Single
Upper Shell
Digital Tempera-
ture Display
Lamp
Thermostat Knob
215T-KFA
215,000
1.63
13
9.0
2.8
Single
Rear Handle
Fan Guard
Pressure
Gauge
Fuel Tank
Drain Bolt
Power
Cord