Introduction - Nostalgia Products CBD5SS Manual De Instrucciones

INTRODUCTION

Congratulations! You are now the proud owner of your very own HOMECRAFT
ON-TAP BEER GROWLER SYSTEM from Nostalgia™! Perfect for the kitchen or bar
countertop, use the included reusable growler or any standard 5-liter growler keg to
dispense your favorite craft brews at home. Equipped with a CO2 cartridge pressure
system, this unit will keep your beer fresh for up to 30 thirst-quenching days.
Proper Location
To ensure that your ON-TAP BEER GROWLER SYSTEM works to the maximum efficiency
for which it was designed, keep it in a location where there is proper air circulation and
electrical outlets.
Choose a location where the unit will be away from heat
and will not be exposed to direct sunlight.
• Indoor use only. It should not be used outdoors.
• Unit requires the use of a standard unthreaded CO2 cartridge.
• Each CO2 cartridge should be able to dispense up to one (5L) growler kegs.
• Capacity: 0.32 cu. ft.
• Unit dimensions: L 15.5" x W 10.5" x H 17"
• Designed to be freestanding and should not be placed in a built-in or recessed area.
• Recommended dimensions for clearances around the ON-TAP BEER GROWLER SYSTEM:
Sides ........................ 2 ½" (64 mm)
Back ......................... 4" (102 mm)
• Unit weight: 15 lbs.
Selecting A Keg
The ON-TAP BEER GROWLER SYSTEM includes a Reusable 5L Growler Keg. Simply
bring the reusable keg to your favorite brewery to be filled with your favorite
craft beer, then bring it home so it can be enjoyed within the next 30 days.
This unit is also compatible with all standard 5L growler kegs, both pressurized
and non-pressurized. Unit DOES NOT fit non-standard 5L growler keg sizes.
PRESSURIZED
Pressurized Kegs
include a built-in tapping
system that connects
to the top of the keg.
5
NON-PRESSURIZED
Non-Pressurized Kegs (Gravity Kegs) have a
venting plug on the top, and in some cases, have
a pouring spout on the side towards the bottom.