Publicidad
Idiomas disponibles
Idiomas disponibles
Optional Requirements under EN 443
Option
Radiant heat classification: 14kW/m3
Low Temperature classification: -30°
Two-Year Limited Warranty
Bullard warrants to the original purchaser that the firefighter helmet is
free of defects in materials and workmanship under normal use and
service for a period of two (2) years from the date of manufacture. The
Bullard obligation under this warranty is limited to repairing or replacing
articles that are returned within the warranty period, shown to be
defective after inspection by Bullard, and subject to the following
limitations:
• Helmet must be returned to Bullard with shipping charges prepaid.
• Helmet must not be altered from its original factory configuration.
• Helmet must not have been misused, abused or damaged in transport.
In no event shall Bullard be responsible for damages, loss of use, or
other indirect, incidental, consequential or special costs, expenses or
damages incurred by the purchaser, notwithstanding that Bullard has
been advised of the possibility of such damages.
ANY
IMPLIED
WARRANTIES,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO TWO (2) YEARS FROM THE DATE OF
MANUFACTURE OF THIS PRODUCT.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusion may not apply to
you. This warranty gives you specific legal rights, and you may have other
rights which vary from state to state.
RETURN AUTHORIZATIONS: Contact our Inside Sales Team to obtain
written permission to return any product. Material returned for credit will
be subject to factory inspection. Current products or products under
warranty will be subject to a rehandling charge less original freight
charge.
Obsolete or special order products cannot be returned without written
permission.
INCLUDING
WARRANTIES
OF
Firedome
Marking
14
<< << << >> >> >>
* * *
WARNING
Firedome helmets are constructed with high quality materials and
workmanship. They are engineered to provide limited protection
against head injuries, when properly adjusted for fit, and when worn
by firefighters during normal fire fighting activities. They are not
designed for direct contact with flames or molten metal, or for
protection against hazardous chemicals, biological, or radiological
agents. Contact of these fire helmets with live wires should be
avoided. NEVER ALTER OR MODIFY the helmet's design or
construction without explicit written instructions from Bullard.
Inspect your helmet and suspension system regularly, regardless of
how often it is used. If you notice any sign of wear, damage, abuse, or
environmental degradation, replace the shell and/or suspension
immediately. If the helmet has sustained a forcible blow (impact), it
must be replaced, even if there is no visible damage. Failure to
observe these warnings and avoid potentially hazardous situations
could result in death or serious injury.
®
FXE Helmet
User Manual
Publicidad
