Rip Curl Oceansearch Manual Del Usario página 5

- Press MODE/SET to advance through Year, Month, Day/date, Hour,
Minute, Seconds, Date format, 12 or 24 hr format, Hourly chime, Key
tone and Feet or Meters.
- Press START/STOP to increase. Press LAP/RESET to decrease.
- Once complete, you must HOLD MODE/SET in for 2 seconds again to exit
setting mode and save any adjustments.
DAYLIGHT SAVINGS TIME (DST) SETTING
- Ensure you are in TIDE/DATE/TIME mode.
- HOLD START/STOP in for 5 seconds and your watch will automatically
adjust to Daylight Savings Time. DST icon will appear in the bottom left
corner of your watch.
NOTE: At the start and end of DST season you MUST use the DST function as it corrects
the current time, and TIDE time to be DST correct.
DUAL TIME SETTING
- Ensure you are in TIDE/DATE/TIME mode.
- Press LAP/RESET to VIEW the second time zone.
- HOLD LAP/RESET in for 5 seconds to change to the second time zone, T2
icon will appear and stay displayed in the bottom left hand corner of your
watch. When in T1 no icon is visible in the screen.
TIDE SETTING
- Press MODE/SET to advance to TIDE MODE.
- HOLD MODE/SET in for 2 seconds to enter beach setting.
- To toggle between REGIONS use START/STOP & LAP/RESET.
When you find desired region press MODE/SET.
- Use START/STOP & LAP/RESET to toggle through to your desired COUNTRY.
Press MODE/SET to lock in your country.
- Use START/STOP & LAP/RESET to toggle to desired BEACH.
- HOLD MODE/SET in for 2 seconds to save selected beach.
- Once you set your beach you can use the START/STOP & LAP/RESET to
toggle through all tide information for today as well as past and future tides.
B B
5