Canopy; Operation; Using The Stroller; Important - Britax B-FREE Guía Del Usario

Canopy

1. Slide the canopy stay brackets into the
stroller frame mounts until they lock into
place.
2. Snap the support straps to the frame
just below the stroller handle and
secure them using the hook and loop
fasteners on the inside of the canopy.
3. Drape the inner canopy flap over the
back of the stroller and secure the
hook and loop fasteners to the stroller.
Drape the outer canopy back flap over
the inner canopy flap.
4. Attach the side of back flap to the
hook and loop fasteners to the side
of the stroller, then attach the hook
and loop fasteners along each outside
edge of the canopy to the stroller
frame.
8

Operation

Using the Stroller

Folding the Stroller
IMPORTANT: Always apply brake and remove children before folding
the stroller.
1. Press the frame release button.
NOTE: Do not continue to hold the
frame release button once pressed.
2. Remove your hand from stroller frame
and hinge area and lift the frame
release strap in the middle of the seat
until the stroller collapses. Push stroller
closed to engage chassis lock. A click
will be heard.
9