4235 020 17172
16-12-2005
08:04
Pagina 13
C
4
Now, insert the screwdriver into the middle slot located on
the top front part of the handle as shown and push the blade
in as far as it will go.
C
5
Now use the screwdriver as a lever to pry the 2 handle
sections apart.
C
6
Pull the 2 handle sections completely apart.
C
7
Insert the screwdriver underneath the electronic circuit board
in multiple places.
C
8
Twist and pry the electronic circuit board loose until it is
completely separated from the handle.
ENGLISH
13