Fiat Abarth 124 spider Manual Del Usuario página 20

530.08.941 Abarth124spider HARD TOP 1ed Versione 2.qxp 01/03/18 14:29 Pagina 20
❒ take the two blocks shown in fig. 5
provided in the hard top kit;
5
❒ locate the housings in the body
(door rear zone) fig. 6 into which the
blocks will be inserted;
❒ position the block with the wider
surface facing towards the front of
the car fig. 7 (the arrow indicates
the direction of travel of the car);
20
04110103-121-026AB
6
❒ insert the block being careful to
make the front part enter into the
slot in the rubber housing present
on the body fig. 8. This procedure
must be performed on both sides
of the car. After assembly, the
wider surface will cover about half
of the housing on the body;
7
04110103-121-027AB
8
04110103-121-030AB
04110103-121-031AB