Fiat Abarth 124 spider Manual Del Usuario página 22

530.08.941 Abarth124spider HARD TOP 1ed Versione 2.qxp 01/03/18 14:29 Pagina 22
❒ hold the hard top pressed against
the windscreen ring fig. 13 and
fig. 14, checking correct coupling
between hard top and windscreen
along the two front side centring
points. Turn the rear part of the
hard top downwards to allow it to
reach the position on the car;
13
22
14
❒ close the central front handle
fig. 15, so that the hard top reaches
its definitive position on the car;
❒ take the hard top two fixing screws
provided, A fig. 16, and the
retaining washers, A fig. 18, from
the hard top kit;
04110103-121-013AB
NOTE The screws B fig. 16 are used
for fixing the trims on versions with soft
top and must be kept in a safe place
and refitted if the hard top is removed.
04110103-121-014AB
15
❒ interpose the two retaining
washers A and use a suitable tool
(TX 40 torx wrench) to fully tighten
the fasteners on the two
attachments at the rear of the hard
top, fig. 17;
04110103-121-015AB