gopart FGP455236GP Manual Del Usuario página 7

8. (Figure 6) Assemble the height adjustment handle to the height adjustment tube as shown in figure 6. Use two M8x40
hex bolts and M8 lock nuts. Do not tighten yet.
9. (Figure 7) Insert a M8x20 hex bolt through the angle bracket. Assemble onto the bolt (in order) the spacer bushing, the
height adjustment strap, a Ø8 big flat washer and a M8 hex lock nut. Tighten.
GRIP
HEIGHT
ADJUSTMENT
M8 HEX
HANDLE
LOCK NUT
M8X40
HEX BOLT
M8X16
HEX BOLT
SPACER
BUSHING
BIG FLAT WASHER
Ø 8
M8 HEX
LOCK NUT
HEIGHT
ADJUSTMENT
STRAP
6
7
UK
7