Preparation - Pari Sinus Instrucciones De Uso

3.2 Preparation

Check the compressor housing, the power cord and the power
Check the compressor housing, ...1
plug for damage every time before using. Make sure that the
local supply voltage complies with the voltage data marked on
the compressor identification label. Only use the compressor if
all components are intact. The compressor must not be operated
if the device or the power cord is damaged, or if damage is
suspected (e.g., after it has fallen or if there is a smell of burning
plastic).
Prepare the device for an inhalation session as follows:
Prepare the device ...
• Assemble the nebuliser as described in the instructions for use
of the nebuliser.
• Connect the pressure hose (8) and the bolus tube (7) to the
compressor as shown above.
The tube connectors can be inserted more easily if they are
twisted slightly when inserting.
- 41 -
en