Classification According To Din En 60601-1; Information About Electromagnetic Compatibility - Pari Sinus Instrucciones De Uso

6.2 Classification according to DIN EN 60601-1

Type of electric shock protection
Degree of protection from electric shock of the
part used (nebuliser)
Degree of protection against water ingress in
accordance with IEC 529 (IP rating)
Degree of protection when used in the presence
of flammable mixtures of anaesthetics with air,
with oxygen, or with nitrous oxide
Operating mode
6.3 Information about electromagnetic
compatibility
Electrical medical equipment is subject to special precautionary
measures with regard to electromagnetic compatibility (EMC).
Such equipment must only be installed and operated in
accordance with EMC instructions.
Portable and mobile high-frequency communication devices can
disrupt electrical medical equipment. Using accessories,
converters and power cords other than those specified, with the
exception of converters and power cords that the manufacturer
of the medical electrical device sells as spare parts for internal
components, can result in higher emission levels or lower the
resistance to interference of the device.
The device must not be placed directly beside or on top of other
devices for operation. If the medical electrical device must be
placed beside or on top of other devices to operate it, it should
be monitored constantly to ensure that it is operating properly in
the arrangement used.
- 50 -
Protection
class II
Type BF
No protection
No protection
Continuous
operation