TP-Link Dual Band Manual Del Usuario página 10

English
A9. Check the Data Roaming:
1) Confirm with your ISP if you are in a roaming service area.
If you are, open a web browser and log into the web
management page.
2) Go to Advanced > Network > Internet to verify that
Data Roaming is enabled. If not, toggle it On to access
the Internet.
Q3. How do I restore the router to its factory
default settings?
A1. With the router powered on, press and hold down the
WPS/RESET button on the rear panel of the router until
the Power LED starts flashing. The router will restore and
reboot automatically.
A2. Log in to the web management page of the router, and
go to Advanced > System Tools > Backup & Restore,
click Factory Restore and wait until the reset process
completes.
Q4. What can I do if I forget my web management
page password?
A. Refer to FAQ > Q3 to restore the router and then set a new
password using 1-15 characters.
8
WPS/RESET Button - Press
and hold until the Power LED
starts flashing.
Q5. What can I do if I forget my wireless network
password?
A1. The default Wireless Password is printed on the product
label of the router.
A2. If the default Wireless Password has been changed, log in
to the router's web management page and go to Basic >
Wireless to retrieve or reset your password.