TP-Link Dual Band Manual Del Usuario página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
LED Indicators
LED
Status
Indication
Indicates the mobile Internet signal strength the router
On
receives in the current location. More lit bars indicates
a better signal strength.
Signal Strength
Off
No signal.
FAQ (Frequently Asked Questions)
Q1. What can I do if the login page does not
appear?
A1. Verify that the computer is set to obtain an IP address
automatically from the router.
A2. Verify that http://tplinkmodem.net or 192.168.1.1 is
correctly entered in the web browser and press Enter.
A3. Use another web browser and try again.
A4. Reboot your router and try again.
A5. Disable and enable the active network adapter and try
again.
Q2. What can I do if I cannot access the Internet?
A1. Verify that your SIM card is an LTE, WCDMA or GSM card.
A2. Verify that your SIM card is in your ISP's service area.
A3. Verify that your SIM card has sufficient credit.
A4. Check the LAN connection:
Open a web browser and enter http://tplinkmodem.net
or 192.168.1.1 in the address bar. If the login page does
not appear, refer to FAQ > Q1 and then try again.
A5. Check your ISP parameters:
1) Open a web browser and log in to the web management
page.
2) Go to Advanced > Network > Internet to verify the
parameters (including the APN, Username and Password)
provided by your ISP are correctly entered. If the
parameters are incorrect, click Create Profile and enter
the correct parameters, then select the new profile from
the Profile Name list.
A6. Check the PIN settings:
1) Open a web browser and log in to the web management
page.
2) Go to Advanced > Network > PIN Management to verify
if PIN is required. If it is, enter the correct PIN provided by
your ISP or disable PIN Lock, and click Save.
A7. Check the Data Limit:
1) Open a web browser and log in to the web management
page.
2) Go to Advanced > Network > Data Settings to verify if
the Total Used exceeds the Total Allowance. If it does,
click Correct and set Total Used to 0 (zero), or disable
Data Limit.
A8. Check the Mobile Data:
1) Open a web browser and log in to the web management
page.
2) Go to Advanced > Network > Internet to verify that
Mobile Data is enabled. If not, toggle it On to access the
Internet.
English
7

Publicidad

Tabla de contenido
loading

Tabla de contenido