Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INDEX
1.- INTRODUCTION
2.- MANUFACTURER'S LIABILITIES
3.- PARTS DESCRIPTION
4.- INSTALLATION
4.1.- UNPACKING
4.2.- MOUNTING THE LAMP
4.2.1.- INSTALLATION OF THE FIXTURE
4.2.2.- ARM INSTALLATION
4.2.3.- ELLECTRICAL INSTALLATION
4.3.- TURNING ON THE LAMP
4.4.- RECOMENDATIONS FOR USE
5.- CLEANING AND STERILIZIG
6.-
MAINTENANCE AND UPKEEP
6.1.- PERIODIC CHECKS
6.2.- ADJUSTMENT OF THE ARM
6.3.- CHANGE THE FUSES
7.- TECHNICAL CHARACTERISTICS
8.- PLANS AND DRAWINGS
1.- INTRODUCTION
We would like to thank you for the trust you have placed in ORDISI, S.A. when you purchased a lamp from the IGLUX series.
Your lamp model IG-65DC has been specially designed for a recognition, for any medical specialty, but mainly in places where
a total absence of calorific radiation is required, conserving very good quality of light.
Please read this manual carefully in order to ensure your model IG-65DC gives you many years of trouble free use. If you have
any requires about your IG-65DC, please contact your nearest ORDISI distributor or contact us to our head office directly:
2.- MANUFACTURER'S LIABILITIES
ORDISI, S.A. is responsible to whatever is related to the equipment safety, reliability and operation but only if:
The installation is strictly performed following the instructions of this manual.
The readjustment, extensions, alterations, and/or repairs are performed by ORDISI, S.A. duly authorized personnel.
The electrical installation in the related premises metes I.E.C. (U.N.E.) standards and the Low Voltage Regulations.
The equipment is operated according to this manual's instructions.
If any accessories and consumables that should be regularly replaced, are original accessories and consumables or are
homologated and authorized by ORDISI, S.A.
3.- PARTS DESCRIPTION
1. Handle
2. LED's module
3. Cupola
4. Yoke
5. Keypad
6. Moving arm
7. Horizontal arm
8. Vertical arm
9. Embellisher
10. Double support
ORDISI, S.A.
Tecnología, 2
08780 Pallejá (Barcelona) - España
Tel.: +34 93 334 01 12
Fax.: +34 93 440 25 64
e-mail: export@ordisi.com
ENGLISH
Página 6 de 11
Publicidad
Tabla de contenido
