Parts Description - ORDISI IG-65W Manual De Uso De Mantenimiento

INDEX
1.- INTRODUCTION
2.- MANUFACTURER'S LIABILITIES

3.- PARTS DESCRIPTION

4.- INSTALLATION
4.1.- UNPACKING
4.2.- MOUNTING THE LAMP
4.2.1.- INSTALLATION OF WALL PLATE
4.2.2.- ELECTRICAL INSTALLATION
4.3.- TURNING ON THE LAMP
4.4.- RECOMENDATIONS FOR USE
5.- CLEANING AND STERILIZIG
6.- MAINTENANCE AND UPKEEP
6.1.- PERIODIC CHECKS
6.2.- ADJUSTMENT OF THE ARM
6.3.- CHANGE THE FUSES
7.- TECHNICAL CHARACTERISTICS
8.- PLANS AND DRAWINGS
1.- INTRODUCTION
We would like to thank you for the trust you have placed in ORDISI, S.A. when you purchased a lamp from the IGLUX
series. Your lamp model IG-65P has specially designed for a recognition, for any medical specialty, but mainly in places
where a total absence of calorific radiation is required, conserving very good quality of light.
Please read this manual carefully in order to ensure your model IG-65P gives you many years of trouble free use. If you
have any requires about your IG-65P, please contact your nearest ORDISI distributor or contact us to our head office
directly:
2.- MANUFACTURER'S LIABILITIES
ORDISI, S.A. is responsible to whatever is related to the equipment safety, reliability and operation but only if:
 The installation is strictly performed meeting the instructions of this manual.
 The readjustment, extensions, alterations, and/or repairs are performed by ORDISI, S.A. duly authorized personnel.
 The electrical installation in the related premises metes I.E.C. (U.N.E.) standards and the Low Voltage Regulations.
 The equipment is operated according to this manual's instructions.
 If any accessories and consumables regularly replaced are original accessories and consumables and its are
homologated and authorized by ORDISI, S.A.
3.- PARTS DESCRIPTION
1. Handle
2. LED's module
3. Cupola
4. Yoke
5. Keypad
6. Moving arm
7. Horizontal arm
8. Wall plate
9. Embellisher
10. Cable network
ORDISI, S.A.
Tecnología, 2
08780 Pallejá (Barcelona) - España
Tel.: +34 93 334 01 12
Fax.: +34 93 440 25 64
e-mail: export@ordisi.com
ENGLISH
Fig. 1 – Parts of the IG-65W lamp.
Página 6 de 11