Information On Safety; Important - Master BCM 191AB Manual De Instrucciones Para El Uso Y Mantenimiento

en
1... SAFETY INFORMATION
it
2... UNPACKING
de
3... ASSEMBLY AND INSTALLATION
(ONLY FOR QUALIFIED PERSONNEL)
es
4... OPERATION
fr
5... CLEANING AND MAINTENANCE
6... TROUBLESHOOTING
nl
pt
da
IMPORTANT: READ AND UNDERSTAND THIS OPERATIONAL MANUAL PRIOR
fi
TO ASSEMBLING, STARTING UP OR CONDUCTING MAINTENANCE ON THIS
COOLER. USING THE COOLER INCORRECTLY CAN CAUSE SERIOUS OR FATAL
no
INJURIES. KEEP THIS MANUAL FOR FURTHER REFERENCE.
sv
pl
►►►1. INFORMATION ON
ru
SAFETY
(Pic. 1)
cs
hu
IMPORTANT: This appliance is not
suitable for use by persons (including
sl
children) with reduced physical, senso-
ry and mental capacities or with lack of
tr
experience or knowledge unless super-
hr
vised by a person responsible for their
safety. Children must be supervised to
lt
make sure they do not play with the ap-
pliance.
lv
►1.1. During installation, the electri-
et
cal connection, water connection,
use and maintenance of the cooler,
ro
comply with all local regulations and
sk
standards in force.
►1.2. The cooler must only be installed,
bg
adjusted and serviced by qualified
uk
personnel.
►1.3. Use this appliance to cool, dehu-
bs
midify, ventilate or remove dust.
el
►1.4. In order to prevent the risk of fire
or serious injuries, install the cooler
zh
at a safe distance from heat sources
(fireplaces, fire, etc.), from sparks
(welding machines, electrical pan-
els, etc.) or from combustion fumes
(hoods, chimney flues, etc.).
►1.5. Improper wiring or improper in-
stallation can cause hazards or seri-
ous damage.
PARAGRAPH SUMMARY PARAGRAPH SUMMARY
►1.6. Before carrying out any operation,
make sure that the cooler, the power
supply cable, the control panel, etc.,
are perfectly dry, in order to prevent
any hazard or serious damage (never
work with wet hands).
►1.7. Only install outdoors.
►1.8. The cooler must be installed on
a stable and level structure, so as to
prevent any risk (the structure and the
plugs must be adequate to support
the weight of the appliance).
►1.9. The minimum safety distance rec-
ommended between the cooler and
walls or other items is 0.5 m.
►1.10. A 0.8 m
m
must be provided (always ensure
an exchange of air within the cooled
environment). In the event of forced
air ventilation, the amount extracted
should be less than 85% of the air in-
take. Forced ventilation can be com-
bined with natural ventilation.
►1.11. Power the cooler solely with the
voltage and frequency specified on
the nameplate, using cables of suit-
able section (the supply voltage must
not vary more than ± 5% from the val-
ue stated on the nameplate).
►1.12. Make sure the cooler is earthed
properly.
outlet for every 3,600
2
/h of air supplied to the cooler
3