Cleaning And Maintenance - Master BCM 191AB Manual De Instrucciones Para El Uso Y Mantenimiento

5 - MOTOR ROTATION SPEED:
en
-Use the arrow button (right direction) to
it
increase the rotation speed.
-Use the arrow button (left direction) to
de
decrease the rotation speed.
es
►3.7.4. All parameters must be set if the
fr
cooler is configured for "INDIVIDUAL"
nl
or "LEADER" mode. If the cooler is
configured for "SLAVE" mode, the
pt
"LEADER" device configuration of the
da relevant area is implemented.
fi
no
sv
►►►4. OPERATION
(Pic. 9)
pl
WARNING: Carefully read the "SAFETY
ru
INFORMATION" before switching on the
cooler.
cs
WARNING: Only use clean water to
hu
prevent failures or other anomalies.
sl
WARNING: Verify if your electronic
tr
system is earthed correctly. Connection
to the electrical mains must be carried
hr
out in compliance with the national
lt standards in force. Only power the
appliance the with voltage and frequency
lv
as specified on the nameplate.
et
IMPORTANT: The cooler is equipped with
a water drain, located at the base of the
ro
appliance. The cooler will completely
sk
drain the water from the tank, executing
a wash cycle (the automatic drain time
bg
must be set by the user). During the
winter season or in the event of a long
uk
period of inactivity, leave the circuit and
bs
water tank empty.
el
For correct operation, refer to the specific
zh
manual attached to the display.
►►►5. CLEANING AND MAINTE-
NANCE
WARNING: BEFORE CARRYING OUT
ANY MAINTENANCE
DISCONNECT THE APPLIANCE FROM
THE MAINS POWER
SUPPLY.
Depending on the environment where the
appliance is used, dust, dirt, etc. can affect
the performance of the cooler. We therefore
recommend cleaning (never clean with
a high pressure water jet) the outside of
the cooler with a soft cloth, removing any
obstructions from the air vents.
IMPORTANT:
-The cooler tank must be emptied and
sanitised periodically depending on the
use.
-The cooling pad surfaces must be peri-
odically inspected and sanitised depend-
ing on the use.
-For sanitation operations, biocidal prod-
ucts that comply with European regula-
tion no. 582/2012 must be used.
OR REPAIRS,
AND WATER