Modifying The Programmed Schedule; Using The Copy Feature - Orbit Clear Comfort Pro 83521 Guia Del Usuario

MODIFYING THE PROGRAMMED SCHEDULE

1. Switch the thermostat to the MODE
you want to program (heat or cool) and
press SET.
2. Press p or q to scroll between days
and press SET when the day you would
like to schedule is flashing.
3. Press p or q to set your wake start
time and press SET to accept the time.
26
4. Press p or q to set the wake
temperature and press SET to accept the
temperature and proceed.
5. Follow steps 3 and 4 to set
the time and temperature for
the remaining periods.
6. Continue to set up each day individually
or use the copy feature to copy one day
to another (see page 25) or press RUN to
save and exit.
From the days of the week menu you can
copy a schedule from a single day to one or
more days. To access that menu, if you are not
already there, switch the thermostat to the
MODE you want to program (heat or cool)
and press SET.
1. Press p or q to scroll to copy and press
SET when the word "copy" is flashing.
"Copy from" will appear on the display.

USING THE COPY FEATURE

2. Press p or q to select the day you would
like to copy and press SET when that day
is flashing.
3. Press p or q to select the day you
"Copy to" will appear on the display.
would like to copy to. You can select an
individual day or select all to have your
schedule copied to every day of the
week.
4. Press SET to advance to the next step or
RUN to save and exit.
27