TEFAL MULTICOOK PRO Manual Del Usario página 37

Technical troubleshooting guide
Malfunction description
Any indicator lamp off and no
heating.
Any indicator lamp off and
heating.
Cooking indicator lamp off,
keep warm indicator on.
Steam leakage during using.
Rice half cooked or overtime
cooking.
Rice half cooked or overtime
cooking.
Automatic warm-keeping fails
(product stay in cooking
position, or no heating).
Water leakage on the table.
Remark: if inner bowl is deformed, do not use it anymore and get a replacement from the
authorized service center for repair.
34
Causes
O Multicook Pro não está ligado
à corrente.
Problem of the connection of
the indicator lamp or indicator
lamp is damaged.
Cook button is not in cooking
position.
Lid is badly closed.
Micro pressure valve not well
positioned or uncomplete.
Lid or micro pressure valve
gasket is damaged.
Too much or not enough water
compared to rice quantity.
Not sufficiently simmered.
Dew collector missing or dew
collector overflow.
Solution
Verify the main plug is well
engaged in the product body.
Send to the authorized service
center for repair.
Put the cook button in low
position (cooking).
Open and close again the lid.
Stop the cooking (unplug the
product) and check the valve is
complete (2 parts locked
together) and well positioned.
Send to the authorized service
center for repair.
Refer to table for water
quantity.
Simmer as required in table
cooking paragraph.
Send to authorized service
center for repair.
Empty the dew collector for each
use verify good positionning of
the dew collector.