Trust Flex Design Tablet Manual Del Usuario página 4

Flex Design Tablet – User's Manual
Package contents (Package contents)
Pen
AAA Battery
USB Cable
USB Connection
Pen-tip removal tool
Spare pen-tips (x2)
Tablet:
Cleaning: Clean the tablet with a dry cloth. Do not use or spill water on the tablet, or its pen.
Storage: Store the pen so that it does not rest on its tip. Do not store the pen on the tablet
Install tablet (Install tablet)
Insert the Trust CD-ROM into your CD drive.
Click "Run Setup.exe – Published by Trust International BV"
Click "Install driver"
Welcome to the Installshield: Click Next
Installshield Wizard Complete: Click "Finish" to restart your computer. (If you have unsaved
documents and files, select "No" and click "Finish" to restart your computer later)
After your computer has restarted, the tablet can be connected to a USB port and is ready to use.
Insert the battery in the pen before using the tablet. Unscrew the upper part of the pen, and place the battery
(+ towards the pen tip).
Draw (Draw)
Open a drawing program (For example, Artweaver is available on the Trust CD-ROM: select "Install
ArtWeaver" from the menu to install it.)
Create a new document (File > New)
Set the attributes of your new document, press OK
Select a tool that supports Pen Pressure Sensitivity (Ex: in Artweaver: default brush)
With the pen's pressure levels, you can use your brush the way you would use a real pencil and draw the
thickness and opacity you desire.
The pen can detect 1024 levels of pressure, and use the variation in levels to automatically change the size, the
color, or various settings of the tool you are currently using.
This allows for flexibility and gives a very intuitive feeling to your graphic work.
Move the pen in the tablet's working area: the cursor will follow the movements. Hovering the pen tip at
about 5 mm from the surface will allow you to move the cursor on your screen. When you touch the
tablet's surface, your brush will start drawing on the new document.
The color panel allows you to select different colors.
By default in most drawing programs, the color your brush is applying is black. Depending on the pressure you
exert with the pen on the tablet's surface, your brush will paint in nuances going from white (no pressure) to
black (full pressure).
2