Changing The Batteries; Cleaning - Alpha IP RTA 61001-N1 Manual Del Usario

8 Changing the batteries

The flashing code "short illumination in orange (after green or red reception signal)"
indicates low batteries. At the same time, the symbol for low batteries is displayed
in the Alpha IP app. Replace the batteries by two new ones of the type LR03/Micro/
AAA.
1. Take off the device from the installation bottom (see page 5, fig. 3).
2. Remove the batteries from the back side.
3. Insert two new batteries (type LR03/Micro/AAA) according to the marking.
4. Position the room control unit Analog onto the installation bottom and latch
it in.
9 The room control unit performs a self-test for the duration of approximately 2
seconds.
9 This is followed by the initialisation.
9 After that, the test indication flashes (in orange and green).

9 Cleaning

Clean the device with a soft, clean, dry, and lint-free cloth. In order to remove heavy
contamination, moisten the cloth slightly with lukewarm water. Use a solvent-free
detergent for cleaning.
Cleaning
39