Creating And Erasing Songs - Alesis SR-16 Manual De Inicio Rápido Para El Usuario

Creating and Erasing Songs

The SR-16 can remember the order in which you selected Patterns, which variations were
selected, and when you selected fills. Recording this information in the SR-16's Song mode
creates a complete Song. Begin with the SR-16 stopped.
2
The display upper left should say EMPTY
SONG. If not, press the Up or Down buttons
until an empty song is selected.
4
Choose a Pattern for Song step 1 by entering a
Pattern number and A or B variation. This step can
be a Fill if you press Fill along with A or B. User
Patterns should not be selected for now.
5
Press PLAY.
6
Choose Patterns, A and B
variations, and Fills as
described in the previous
pages. Each selection will
be remembered as
another Song step, and
the SR-16 will also
remember the exact
instant you selected a Fill.
If you don't specify a new
Pattern, every time a
pattern repeats it will add
a new song step.
7
When you've finished creating
the Song, press STOP.
10
To erase the Song, you must have the Song selected. The SR-16 should be stopped
and in Perform mode. Press ERASE and, while holding it down, press PLAY.
The Song will be erased.
1
Select Song mode.
STEP 01
END
C O M P O S E
8
To hear your Song, press
PERFORM/COMPOSE
to select Perform mode.
Then press PLAY.
9
If you like the Song, great!
The SR-16 will remember it.
Entering the Song number
in Song and Perform mode
will call up the Song.
7
3
Press the PERFORM/
COMPOSE button
until the display's
lower middle shows
COMPOSE.
S O N G
U S E R
PRESS PLAY
T E M P O
V O L U M E