QFX J-220BT Guia De Inicio Rapido página 2

*PLEASE SET THE PROPER VOLTAGE BEFORE
USE. FOLLOW THESE STEPS TO AVOID DAMAGE*
OPEN
OPEN
+
-
3
VOLTAGE SETTING
OPEN
OPEN
-
110V / 220V
+
2
110V / 220V
4
AC IN
1. Please locate the battery compartment
on the back side of the unit. Remove the lid
and AC poswer cable found inside.
2. Locate the voltage switch found in the
lower right corner and check voltage
position.
3. Use a thin tool to toggle the switch to
the proper voltage postion (110V or 220V).
* If the unit is not set to the porper voltage,
the unit will get damaged.
4. Close the battery compartment and plug
in the AC Power Cable
.