Back Panel - QFX E-B5 Guia De Inicio Rapido

11
12
4

BACK PANEL

5 6
1
1. ON/OFF Switch: Press to turn the device on/off.
2. AC Input: Supports an IEC type power cable.
10
3. Light Switch: Press to turn ON/OFF the LED light.
4. MIC Input: This jack is used for a Microphone only.
Do not connect any line level signals to this input.
5. Line Input:
9
•XLR: This 3-pin connector is designed for a
balanced signal.
•RCA: This connector is for unbalanced signals.
8
•AUX: This is a 3.5mm jack input and it can
connect a mobile device or other 3.5mm (TRS)
device.
6. Line Out: This jack is used to send the incoming
line level signal to line Input on another mixer or
7
power amplifier.
7. Master Volume: This knob is used to regulate the
overall volume of the unit.
8. 5-BAND GRAPHIC EQ: Boost or Cut +/-10dB of
the selected frequency. 100Hz, 400Hz, 1kHz, 4kHz,
10kHz.
9. Levels:
• MIC Level: This knob is used to regulate the
volume of the microphone that is connected to
3
the MIC jack.
•This jack is used for line level devices. Connect
CD players,Tape Decks, Mixers, Rhythm
Machines, Keyboards or Samplers. .
2
• Player Level: This knob is used to regulate the
volume of the Bluetooth connected device.
10. USB: Insert a USB device for .mp3 playback
11. SD/MMC: Insert an SD Card for .mp3 playback.
12. Global Functins:
• MODE: Press to toggle through modes.
BT/ LINE/USB/SD/FM
• Play/Pause/TWS: Play or Pause current track.
Press and hold for TWS sync.
• FOLDER: Search for tracks in file.
• LOOP: Loop current track, playlist, or shuffle
tracks.
• REWIND: Press for PREVIOUS track or FM station.
• FORWORD: Press for NEXT track or FM station.