How To Operate; Helpful Tips - Nostalgia HDT600RETRORED Manual De Instrucciones

HOW TO OPERATE

• Place the POP-UP HOT DOG TOASTER on a stable surface
near an electrical outlet before starting.
• Always make sure that the cord is away from any water source.
• Plug the appliance into an electrical socket.
• Place two hot dogs into openings in the Hot Dog Basket. Make
sure Hot Dog Basket is properly inserted in the toaster.
• Open two hot dog buns and place them in the semi-circle openings.
• Select desired heat setting (1=LOW, 5=HIGH).
• Press lever down to start cooking cycle.
• When cooking has completed, the basket will automatically pop up.
• To shorten the cooking time, simply turn the heat control knob to
a lighter setting or all the way to heat setting 1 (LOW).
• To stop cooking before cycle has completed, press the STOP button.
• Unplug the appliance and allow unit to cool completely.
• After unit is cool to the touch, remove the Hot Dog Basket and Crumb Catcher
and follow directions in Cleaning and Maintenance section to clean unit.
• Return Hot Dog Basket and Crumb Catcher to the toaster and store
your POP-UP HOT DOG TOASTER in a safe place until next use.
By following these simple instructions, your POP-UP HOT DOG
TOASTER will be fun for friends, family and kids of all ages!

HELPFUL TIPS

HOT DOGS AND BUNS
All hot dogs and buns are not the same; therefore you will need to adjust
the variable heat controller accordingly. Room temperature hot dogs and
buns will cook more quickly than those just removed from the refrigerator.
Hot dogs should have an internal temperature of 165˚ F after cooking.
BURNING/SMOKING
If the machine is burning or smoking during cooking, press the
STOP button to end the cooking cycle. After machine has cooled
completely, use tongs to remove the hot dogs and buns.
Smoking may also be caused by excess crumbs and pieces of hot dog
stuck inside the machine. To prevent smoking, make sure to clean the
Hot Dog Basket and empty Crumb Catcher after each use.
6