Getting Started - Spypoint LINK-MICRO-LTE Manual De Instrucciones

GETTING STARTED

CHOOSING A POWER SOURCE (3 OPTIONS)
• Alkaline or lithium AA batteries
• Rechargeable battery 12 V (#KIT-12V sold separately)
• Rechargeable battery pack 3,7 V (#LIT-10 sold separately)
NOTE
We recommend using the SPYPOINT #LIT-10
rechargeable lithium battery pack, sold separately.
FOR BEST RESULTS AND NO LEAKAGE
• Use only new alkaline or lithium batteries.
• Do not mix new and old batteries.
• Do not use rechargeable AA batteries
(their lower voltage can generate operational issues).
HOW TO INSTALL AA BATTERIES PROPERLY
• Unlock the latch and open the
LINK-MICRO-LTE door.
• Remove the battery compartment by
grasping it by the 2 small notches on
the side and pulling it out (see photo).
• Insert the AA batteries into the battery
holder following polarity (+) and (-)
indications.
• Place the battery holder back into the
battery compartment.
4