Westfalia 321743600001 Manual De Montaje página 2

SIARR
11 - 87
PREPARATION
* Remove the rear lights.
* Remove the bumper.
* Dismantle and remove the absorber.
* Make a cut in the bumper as per the sketch.
ASSEMBLY
* Position the 2 towing arms A and B inside the longitudinals,
then fasten them, without tightening, to the points marked X
using fastening kit X.
* Fasten the tow bar to the points marked V and W using
fastening kits V and W.
FINISHING
* Fit the tow ball by positioning screw head Z inside
the support (nuts / washers on the outside).
* Tighten all of the nuts, bolts and screws starting with
arms A and B to the torques indicated below.
FASTENING KIT
2 off HM10x30 screws
V
2 off CS10 washers
2 off HM10x35 screws
W
2 off CS10 washers
2 off HM10 nuts
4 off HM112x30
Y
4 off CS12 washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
! Affix the sticker in the position
4 off HM10x30 screws
X
4 off CS10 washers
4 off 10,5x36 max. plain washers
2 off HM16x45 screws
Z
2 off HM16 nuts
2 off DEC16 washers
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM1187-C - FOLIO NDMANG
!
NB :
Connecting a universal wiring kit ref.8526 is absolutely impossible on the vehicle (may
cause damage).
It is essential to use either a dedicated wiring kit or a relay box ref.8530.
Type Type
Approval No.
Tow bar for
VOLKSWAGEN e11*94/20*01*4701
TOURAN
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
321743600001
Max. Total Max. Total Max. Verti-
Authori. Weight Towable Weight cal load
2 290 kg 1 500 kg
Value
D
75 kg 8,89 kN