Fan Installation - GE 20444 Manual Del Usuario

There are two options to install the fan:
1) ASSEMBLY ON CEILING - follow steps 4 - 12.
2) ASSEMBLE ON FLOOR - follow steps 9 - 12 to first assemble blades and light kit to fan while on
floor, and then steps 4 - 8 to install fully assembled fan onto ceiling. TIP: Practice attaching the
fan motor to ceiling (step 6A-E) before installing fan blades and light kit. To release fan from
ceiling, follow instructions on page 20.
4
Slide down trim ring from canopy.
5
Remove rubber inserts (loosen the four mounting screws slightly if needed) from
canopy and discard.
11

Fan Installation