Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
10
Install Mounting plate.
11
Remove 1
Loosen 2
Note: Loosen 2 and
remove 1 of the 3 light
kit mounting screws on
the mounting plate.
Install LED Light kit .
12
Install shade-turn to secure.
15
Fan Installation
Note: Loosen 2 and remove 1
of the 3 mounting plate screws
located at the bottom of motor
assembly.
Remove 1
Loosen 2
WARNING: Make sure to fully
secure the glass shade in
place by turning the shade
clockwise (to the right) until it
is locked in place and can no
longer be rotated.
Publicidad
Tabla de contenido
