Honeywell Water Defense RWD41 Guia Del Usuario página 3

Operating Instructions
1. Open the battery cover on the top of the unit, insert 1 x 9V battery in compart-
ment and attach the battery leads to appropriate battery terminal and replace
the battery cover.
2. Attach leader cable (looks like a phone cord) to the jack on the bottom of the
alarm unit.
3. Place alarm box within range of area you would like to place sensing cable.
Attach the double stick tape on the rear of the alarm and attach to dry surface of
wall or other flat surface.
4. Attach the leak sensing cable to the plug receiver on the end of the leader cable.
5. Place sensing cable in the area you would like to detect the water.
6. Utilize the five c-clips provided to affix the leak detection cable to the surface you
would like to detect.
7. You have now activated the Water Defense™ Water Alarm.
3 69-2495EFS—01