Set Master Code - eTIGER ES-DLA03 Manual Del Usuario

Set Master Code

Please do remember your Master Code because the Master Code can't be reset if forget it.
Programming Step
1. Enter Program Mode:
2. Update Master Code:
3. Exit:
Add Users PIN(s)
User ID: 0~99
PIN length: 6 digits
Programming Step
1. Enter Program Mode:
2. Add PIN:
3. Exit:
Add Users Card(s)
User ID: 100~399
Card type: 13.56MHz M1 Card
Programming Step
1. Enter Program Mode:
2. Add Card:
Using Auto ID(Allows to assign Card
tonext available User ID number)
OR
Add Card:
Select Specific ID(Allows Master to
define a Specific User ID to associate
the card)
3. Exit:
Add finger print (s)
User ID: 400~499
Programming Step
1.Enter Program Mode:
2. Add fingerprin: Using Auto ID(Allows to
assign fingerprint to next available User
ID number)
OR
2.Add fingerprint: Select Specific ID(Allows
Master to define a Specific User ID to
associate the fingerprint)
3. Exit:
Keystroke Combination
* (Master Code) #
0（New Master Code）#
（Repeat New Master Code）#
Master code is any 6 digits
*
Keystroke Combination
* (Master Code) #
1 (User ID) # (PIN) # (Repeat PIN) #
The users can be added continuously
*
Keystroke Combination
* (Master Code) #
1 (Read Card) #
The cards can be added continuously.
1(User ID) # (Read Card) #
*
Keystroke Combination
* (Master Code) #
1(User ID) #(Readfingerprint)#(Read
fingerprint)#
*