Set Buzzer
Programming Step
1. Enter Program Mode:
2. Buzzer OFF:
OR
Buzzer ON:
3. Exit:
OTHERS
Users Operation
Programming Step
PIN User Access:
Card User Access:
Fingerprint Access:
PIN + Card User Access:
By Remote Transmitter:
How to Open & Close the lock when the user is inside the door?
Programming Step
Open the lock
Close the lock
By Remote Transmitter
Lock Immediately
The Wireless Lock will be locked automatically around 5 seconds after we open it. If we want to
lock it faster, please press "0 #" on the Keypad, or press
on the wireless lock, it will lock immediately.
CLOSE
Pair Wireless Keypad with Wireless Lock
Note: 1. The Wireless Lock can pair 16 parts (Keypad + Remote Transmitter) maximum.
2. When pairing, all parts must be paired, then exit paring mode. If need adding one more
part, you still need to pair all parts again.
Step 1: Enter pairing mode
Open the battery cover of Wireless Lock, press the small round button left of battery with a
slender rod, hold it for 2 seconds until hearing two beeps, that means in the pairing status.
Step 2: Pairing Wireless Keypad
Press the button "0 #" on the keypad, hold it for 2 seconds until hearing two beeps from Lock,
that means pairing successfully.
Step 3: Exit pairing mode
After pairing all parts, press the small round button in the Wireless Lock again, hold it until
hearing two beeps, that means exit pairing successfully.
Keystroke Combination
* (Master Code) #
7 0 #
7 1 # (factory default)
*
Keystroke Combination
(PIN) #
(Read Card)
(Read Fingerprint)
(Read Card) (PIN) #
Press
Keystroke Combination
Touch
on the lock
OPEN
Touch
on the lock
CLOSE
Press
on the Remote Transmitter, or touch