Features; Assembly - Hart HPIF50 Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Motor .................................................................. 20 Volt DC
High Pressure Hose Length ........................................27 in.
Low Pressure Hose Length ......................................17.7 in.

ASSEMBLY

WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-776-5191 for assistance.
OPERATION
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you
are assembling parts, making adjustments, cleaning, or
when not in use. Removing battery pack will prevent ac-
cidental starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
WARNING:
Do not leave items to be inflated unattended while inflator
is in use. These items can burst and could cause serious
injury.
NOTICE:
The inflator is not designed for continuous use. For every
five minutes of inflator use, five minutes of cool down
time are required.
Gauges ................................................Digital Readout (PSI)
Maximum Pressure . .................................................150 PSI
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
Since the pressure gauge is not calibrated, and is
therefore not binding for exact values, tire pressure
must be checked using a reliable measuring device
before driving a vehicle with vehicle tires inflated with
the inflator. Driving a vehicle with improperly inflated tires
could result in serious injury.
NOTICE:
The inflator is capable of inflating to 150 PSI. To avoid
over inflation, carefully follow instructions on items to
be inflated. To avoid product damage, never exceed
recommended pressures.
APPLICATIONS
You may use this inflator for the purpose listed below:
 Inflating high pressure items like motorcycle, car, and
bicycle tires
 Inflating and deflating low pressure items like air
mattresses, rafts and floats
NOTE: The inflator is not designed for commercial
applications.
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 9.
Insert the battery pack into the battery port as shown.

Make sure the latch on the battery pack snaps into place

and the battery pack is secured in the product before
beginning operation.
Depress the latch and pull to release and remove the

battery pack.
5 – English