Ega Master 79617 Manual De Instrucciones página 48

PROHIBITION – Eating, drinking and smoking are forbidden during operation.
NOTICE – Only use original the manufacturer, in order to avoid damages.
Otherwise you risk a decrease in machine performance and an increase
in maintenance work. Check the adherence to the technical specifications
according to the operation manual after each maintenance work.
Generally, pneumatic machines need little maintenance. If the following rules are observed,
the machine will have the expected long life•time and high reliability. Service life and
performance of the machines are decisively determined by:
• The air purity
• The lubrication conditions and maintenance
The regular control of the compressed air filter, as well as the regular checking of the
•
machine with regards to external damages.
Inspection and maintenance can be done by the operator.
Disassembly and re-assembly of the machine have to be executed by qualified staff only.
Incorrect assembly can lead to danger of accident for the operator and to defects on the
machine.
Additionally to the measures described before, it is a must to check the grease in the gear
and to fill it up or replace it, if necessary.
The correct quantity of grease (100 g) is very important with regard to good lubrication and
low warming.
Furthermore we recommend giving the pneumatic saw a general overhaul by the supplier
once a year.
Check oil level / adjust quantity of oil.
48
MAINTENANCE INSTRUCTION