Maintenance And Repair - Ega Master 79617 Manual De Instrucciones

Fig.8
After completing maintenance and repair work and before restarting production make sure
that...
• all materials, tools and other equipment which are required for maintenance or repairs have
been removed from the work area of the machine,
• any fluid leaks have been removed,
• all safety devices on the machine have proper function,
• the oil level was checked,
• fixtures of screw connections are tight,
• removed covers, screens or filters were reinstalled.
The employer ensures that all maintenance, inspection and assembly work is done by
authorized and qualified experts.

Maintenance and repair

Disassembly and re-assembly should be done according to the exploded views, respectively
the sectional drawings (see repair instruction).
All work regarding disassembly and re-assembly, as well as maintenance and repair have to
be executed by skilled staff only.
DANGER – Working with the machine without appropriate preparation and
disregarding of instructions. Shut down the machine properly and let it cool down
to the ambient temperature.
Unscrew locking screw A.
If necessary, refill oil.
Connect to compressed air.
Unscrew locking screw B.
Adjust the quantity of oil with the regulator screw C.
The quantity of oil is adjusted, when the machine is
running. (optimal quantity at 2-3 air bubbles)
Close the openings again with the locking screws A
and B (see fig. 8).
DISASSEMBLY• RE - ASSEMBLY
49