Publicidad
Idiomas disponibles
Idiomas disponibles
QUICK GUIDE
CONFIGURATION
INTERNAL CONFIGURATION
Three working modes are available; EMITTER, RECEIVER and BIDIRECTIONAL. The configuration is done by internal jumpers.
Call activation contact is activated by pulse in BIDIRECTIONAL MODE, and by level in EMITTER mode.
J1: Disables the output
J2: Control
J3: Control
J4: Enables the input.
*In EMITTER mode the receiver equipment must be set as automatic answer. **Factory default.
WEBSERVER CONFIGURATION
The device parameters: IP, extension, volume... are configured from unit's Web Server. For more detail refer to "Optimus SIP web server
configuration" instruction manual.
(http://www.optimusaudio.com/arxius/i_tecnica/Optimus%20SIP%20web%20Server%20configuration%20ENG%20V1.1.pdf).
For a proper operation of the device, you need to configure the LEDs as follow:
Status Light LED1: Lit -> call successful, Blink -> call in progress
Status Light LED2: Lit -> call successful, Blink -> none
CONNECTION EXAMPLES
Unidirectional communication, IA-20SIP as emitter or receiver. Call activation contact is activated by level in emitter IA-20SIP.
Bidirectional Communication, IA-20SIP as emitter and receiver. Call activation contact is activated by pulse in any of two equipments.
IA-20SIP Version 1.3
JUMPER
EMITTER*
RECEIVER**
BIDIRECTIONAL
2/2
J1
J2
J3
J4
ON
ON
->
ON
OFF
ON
->
OFF
OFF
OFF
<-
ON
IP SIP AUDIO INTERFACE
Publicidad
