Parts Description - ORDISI IG-65MB Manual De Uso Y Mantenimiento

INDEX
1.- INTRODUCTION
2.- MANUFACTURER'S LIABILITIES
3.-

PARTS DESCRIPTION

4.- INSTALLATION
4.1.- UNPACKING
4.2.- MOUNTING THE LAMP
4.2.1.- LAMP INSTALLATION
4.2.2.- ELECTRICAL INSTALLATION
4.3.- TURNING ON THE LAMP
4.4.- RECOMENDATIONS FOR USE
5.- EMERGENCY EQUIPMENT
6.- CLEANING AND STERILIZIG
7.- MAINTENANCE AND UPKEEP
7.1.- PERIODIC CHECKS
7.2.- ADJUSTMENT OF THE ARM
7.3.- CHANGE THE FUSES
8.- TECHNICAL CHARACTERISTICS
9.- PLANS AND DRAWINGS
1.- INTRODUCTION
We would like to thank you for the trust you have placed in ORDISI, S.A. when you purchased a lamp from the IGLUX series.
Your lamp model IG-65MB, has specially designed for a recognition, for any medical specialty, but mainly in places where a total
absence of calorific radiation is required, conserving very good quality of light.
Please read this manual carefully in order to ensure your model IG-65MB gives you many years of trouble free use. If you have any
requires about your L33-38, please contact your nearest ORDISI distributor or contact us to our head office directly:
2.- MANUFACTURER'S LIABILITIES
ORDISI, S.A. is responsible to whatever is related to the equipment safety, reliability and operation but only if:
 The installation is strictly performed following the instructions of this manual.
 The readjustment, extensions, alterations, and/or repairs are
performed by ORDISI, S.A. duly authorized personnel.
 The electrical installation in the related premises metes I.E.C.
(U.N.E.) standards and the Low Voltage Regulations.
 The equipment is operated according to this manual's
instructions.
 If any accessories and consumables regularly replaced are
original accessories
homologated and authorized by ORDISI, S.A.
3.- PARTS DESCRIPTION
1. Handle
2. LED's module
3. Cupola
4. Yoke
5. Keypad
6. Moving arm
7. Support bar
8. Wheel with brake
9. Wheel
10. Fuse network
11. Network cable
12. Base foot
17. Emergency Equipment
18. Display
08780 Pallejá (Barcelona) - España
Tel.: +34 93 334 01 12
Fax.: +34 93 440 25 64
e-mail: export@ordisi.com
and consumables and they
ORDISI, S.A.
Tecnología, 2
are
Fig. 1 – Parts of the IG-65MB lamp.
ENGLISH
Página 6 de 11