Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7.3. - CHANGE THE FUSES
If the switch is in the position "on" and the lamp is connected to the mains but does not work, then check the fuse following these
instructions:
1)
Remove the No.10 fuses box cover using a screw driver. The fuse will come out with it
2)
If it is damaged, replace it with a spare (250VF2A) to the left of the network cabling or (250VF5A) on the right.
3)
Replace the use box cover.
The fuse on the right 250VF5A network cable is initially
extracted. To connect the emergency system is necessary to
8. - TECHNICAL CHARACTERISTICS
Electrical connection
Luminous intensity at 100 cm
Illumination intensity adjustment
Light source
Colour temperature
CRI
Power
Ø Light head
d
Field diameter
10
d
Field diameter
50
Depth of field (L1 + L2)
Colour
Approximate Lamp weight
Battery type
Battery Capacity
MODELS:
IG-65M
Moveable lamp
IG-65W
Wall mount lamp
IG-65C
Ceiling lamp
IG-65DC
Ceiling lamp with double arm
IG-65MB Moveable lamp with battery equipment
9. - PLANS AND DRAWINGS
See page 10
insert the fuse into the place.
100-240V / 47-63Hz
65.000 lux (± 10%)
from 20.000 to 65.000 lux
LED
4.500 K (±5%)
>95
28W
300 mm
260 mm
130 mm
170 cm (80 + 90cm)
RAL 9002
15 Kg
Lead- acid free sealed
maintenance.
12V 12Ah
Fig. 5 – General dimensions
Página 9 de 11
Publicidad
Tabla de contenido
