Ega Master MASTEREX 77780 Manual De Instrucciones página 9

• Repairs of the flameproof joints may only be made by the manufacturer or on behalf of the
manufacturer and on his own responsibility. Repair in compliance with the values in tables 1
and 2 of IEC 60079-1 is not accepted.
• Fasteners related with flameproof joints shall have property class at least A2-70.
• The toque for the screws of the terminal box shall be in the range of 22±2kgf.
• When installation, use and maintenance, observe following standards IEC 60079-10,
IEC60079-14, IEC60079-17 and IEC 60079-19.
• Operating under explosive atmosphere, protection cap of charger must be tightened, do not
open the protection cap under explosive atmosphere.
8. EXTERNAL DIMENSION AND INSTALLATION DIAGRAM
Adjustable
angle
range
Platform
installation
7. SPECIAL CONDITION FOR SAFE USE
Ground
270
Wall
installation
9